ROCK PAINTING

-
ROCK PAINTING:
 Here i am going to give you all the information you need on painting sealing & hiding your rocks !


  •  First you need some rocks, the size of a painted rock generally look like this:
 you can also take bigger or smaller size of rocks.

 You can get these stones from the river sides or if you want then you can also get it online.

  • After the collection of rocks the next step will be cleaning them properly.You can soak them in hot water for a few minutes, then scrub away all the dirt with a toothbrush and make sure to complete this step outside in order to avoid clogging your drain.


  • After cleaning properly pet with a towel & let air dry completely before before painting you can also use a dryer t dry the stones.
  • Next is paint and paint brush.The best paint for rocks paint is acrylic paint. It coats extremely well.
now you can choose paint of your choice for painting, you also will be needing a variety of brushes as per the project, so make sure to get a variety of brushes. Specially small, medium & large.
  • We will mainly be using a fine tip paint brush when it comes to rocks.                                                      Exploring with other brush size will allow you to create different style of arts.


  • After painting the stone how to paint glue on the rocks after painting.                                  
  •  After your paint is finishing drying brush a bit of mod podge on rock, use it as a glue or add a layer of mod podge into your painting & let stand for abut 10 minutes to dry. After drying it will give a glossy finish.                                                                                                             not only is it water proof but it is weather proof & it will brighten the color of your rocks will last longer.



                 

using gloss  will help the handwork you put into painting your rock will last longer.

  •      To seal your rocks lay it face down on newspaper & spray a layer of clear gloss on the back hold the can about 12 inches away from the rock so that it doesn't get too wet or drip let it dry completely for at least one hour to avoid being sticky & flip it over & repeat on front side. 
  • Be care full if you rush this step you'll end up sucking your rock to the newspaper permanently,so make sure its dry completely. 
  • If you want you can keep it outside for few hours after spraying them, this way we can seal multiple rocks at once.
  • In few hours your rocks will be ready to hide.



Comments

Post a Comment

Popular posts from this blog

GLASS ETCHING

-
Image
ETCHED GLASS: E tched glass gives a nice frosted and edgy look to your glass and its super easy to create this edged look to your glass at home. It doesn't have to be a wine glass,you can etch anything glass... mason jars,beer mugs,trifle bowls,candles stand etc... MATERIAL REQUIRED: Armor Etch cream Glass according t your choice Vinyl Transfer Tape Cricut or other cutting machine Paint brush  let's start the  procedure... First of all cut out your design on vinyl.I use cricut for cutting  but you can use any other cutting machine or you can even use stickers. Apply transfer tape to your vinyl and then apply it to glass where you want it. With rounded surfaces, I usually make slits around the edge to make sure it lays down flatter. Press all around to make sure it is really stuck every where! Then you can take off the transfer tape. Then start applying the etch cream. Make sure you do this in a ventilated area,it's pretty sme...
Read more

Honeycomb shelf

-
Image
HONEYCOMB SHELF         Hello friends here I will show you how to make this kind of honeycomb shelfs for your walls.        Things we need for this are... A miter saw  Pin boards(1"×4"×6') A staple gun & staples Wood glue Measuring tape & pencil Wood stain & rags Disposable gloves Drop cloths First set your saw to make a 30 degree angle cut.Flip the wood after each cut so that the angels are facing opposite direction. Decide the length according to your requirement.Measure the wood and mark where cuts will be made. After making the pieces assemble it properly and stick it with the glue and staple it before hanging.   And your honeycomb shelf is ready, make as many as you want and use it for decorative purpose also... Friends it can fit in for any thing like for shelf, decorating purpose or for your wordrop etc.And its very easy to make but friends be carefull while cutting the wood.
Read more